行业资讯
摊铺机养护注意事项以及问题预防
来源：http://www.ycgjglcl.com/ 日期：2022-08-01
摊铺机在施工中能不能顺利的胜任，主要取决于平时的维修保养是否到位！下面就来简单认识一下吧。
Whether the paver can be successfully competent in construction mainly depends on whether the usual maintenance is in place! Let's get to know each other briefly.
1.每班工作前，操作人员须检查各控制系统及防护装置工作正常，并确保所有防护装置均已安装。
1. Before each shift, the operator must check that all control systems and safety protective devices work normally, and ensure that all protective devices have been installed.
2.每天工作前，检查所有油脂加注点的润滑情况并根据情况加注油脂。
2. Before working every day, check the lubrication of all grease filling points and add grease according to the situation.
3.每次开机前，将所有开关或操纵杆，电位器旋钮放置中位，将油门开关或操纵杆放置在怠速位置。如防护装置或其他零部件检查出故障，会影响机器的运转，应立即排除。
3. Before each startup, place all switches or control levers and potentiometer knobs in the middle position, and place the throttle switch or control lever in the idle position. If the safety protection device or other parts fail, which will affect the safe operation of the machine, it should be eliminated immediately.
4.济南摊铺机出租厂家提醒您，一旦有异常噪音及故障影响操作，须立即停机。
4. Jinan paver rental manufacturer reminds you that once there is abnormal noise and failure affecting the operation, you must stop the machine immediately.
5.摊铺机租赁每一年应让人员进行检测并书面记录检测结果。
5. Every year when the paver is leased, professional personnel should be allowed to test and record the test results in writing.
此外要注意一些问题的出现与预防：
In addition, we should pay attention to the emergence and prevention of some problems:
输出液压油达不到预定参数：检查各支管压力和油泵输出压力以及测量油泵和马达的转速。接压力表测压力，若泵、马达损坏则进行更换。
The output hydraulic oil cannot reach the predetermined parameters: check the pressure of each branch pipe and the output pressure of the oil pump, and measure the speed of the oil pump and motor. Connect the pressure gauge to measure the pressure. If the pump and motor are damaged, replace them.
油温过高：检查油箱内油量；滤油器滤芯污染情况；泵和马达运转状态。
High oil temperature: check the oil quantity in the oil tank; Pollution of oil filter element; Pump and motor operation status.
补充加油；更换滤油器滤芯；检查溢流阀工作情况，视情况对其进行更换；更换泵和马达已损部件。
Refueling; Replace the oil filter element; Check the working condition of the overflow valve and replace it as appropriate; Replace the damaged parts of the pump and motor.
噪声大：检查油箱中的油是否有气泡产生；管路固定处是否松动；泵和马达工作状态。油不足补充加油；加固松动连接处防止共振；元件损坏应及时更换；排除液压回路中的气体。
Loud noise: check whether there are bubbles in the oil tank; Whether the fixed part of the pipeline is loose; Pump and motor operating conditions. Refuel if the oil is insufficient; Reinforce the loose connection to prevent resonance; Replace the damaged components in time; Remove the gas from the hydraulic circuit.
我们有维修人员和经验丰富的技术指导，有任何设备配件问题，您这边都可以联系我们http://www.ycgjglcl.com，为您的工程保驾护航。
We have maintenance personnel and experienced technical guidance. If you have any questions about equipment accessories, you can contact us here http://www.ycgjglcl.com , escort your project.
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:永诚广建公路材料（山东）有限公司 
备案号：