欢迎访问永诚广建公路材料(山东)有限公司网站!

永诚广建公路材料(山东)有限公司

热线电话

13065071658
15165180688

您现在所在的位置 :首页 - 新闻中心 > 行业资讯

行业资讯

压路机租赁整机之后的保养检查工作

来源:http://www.ycgjglcl.com/ 日期:2022-09-15
压路机动作灵活准确,操纵方便,平整场地有较高的精度,适用于构筑路基和路面、修筑边坡、开挖边沟,也可搅拌路面混合料、扫除积雪、推送散粒物料以及进行土路和碎石路的养护工作。压路机在工程中使用较多,下面济南压路机租赁人员为您讲解下压路机整机保养检查工作。
The road roller is flexible and accurate, easy to operate, and has high accuracy in leveling the site. It is suitable for building subgrade and pavement, building slopes, excavating side ditches, mixing pavement mixture, clearing snow, pushing loose materials, and maintaining earth roads and gravel roads. The road roller is widely used in the project. The following personnel from Jinan Road Roller Rental Department will explain the maintenance and inspection of the road roller.
1、压路机在使用施工前应对整个的机械进行多方面的检查,了解整个压路机机械的构造。
1. Before using the roller for construction, the whole machine shall be inspected in many aspects to understand the structure of the whole roller.
2、刀轴应每日检讨,假如上面的槽磨出越过了刀轴直径25,就会转变。另外,刀轴的运用寿命是钨钢铣刀的半衰期。从广场区域,其性命,龙门铣床5毫米的深度约350-500。但是,有许多因素会影响刀轴的运用寿命,因而每日审查;
2. The cutter shaft should be reviewed daily. If the groove on the shaft is grinded beyond the cutter shaft diameter of 25, it will change. In addition, the service life of the cutter shaft is the half life of the tungsten steel milling cutter. From the square area, its life, gantry milling machine 5 mm deep about 350-500 square meters. However, there are many factors that will affect the service life of the cutter shaft, so they are reviewed daily;
3、4个小时每次运用后光滑的轴承光滑脂。光滑的脂肪、车削和铣削滚筒在玩,在一切轴承油脂涂层;
3. Smooth bearing grease after 4 hours of each application. Smooth fat, turning and milling drums play in all bearing grease coating;
济南压路机租赁
4、压路机的主要的义务是由铣刀,轴承、垫圈、铣鼓,由于长时光的操作历程和路面摩擦,可以更好的延伸机器的运用寿命;
4. The main obligation of the roller is to extend the service life of the machine better due to the long operation history and road friction of the milling cutter, bearing, washer and milling drum;
5、每次操作前用肉眼检讨机:一切紧固件可以收紧?能否有主要部件磨损或裂纹吗?石油供给石油可以实现?可以检讨轴承,检讨掩护盖等;
5. Check the machine with naked eyes before each operation: can all fasteners be tightened? Are there any wear or cracks on the main components? Can oil supply be realized? The bearing and cover can be reviewed;
6、每次操作前检讨压路机,以及压路机出租都可以局部紧固件松(一个松懈的必要收紧)
6. Check the road roller before each operation, and the road roller can be rented, and the fasteners can be loosened locally (a loose one needs to be tightened)
7、每次把压路机出租机支配,检讨刀轴和轴承。假如涌现磨损的轴向地位,您须要更改新的,转变轴的轴承在同一时光。
7. Each time the roller is leased, the cutter shaft and bearing shall be reviewed. If there is emerging wear in the axial position, you need to change the new, changing shaft bearings at the same time.
压路机租赁整机之后的保养检查工作这个问题就讲解完毕了,您对此有什么不理解的地方可以随时来我们网站http://www.ycgjglcl.com咨询。
The maintenance and inspection work of the road roller after leasing the complete machine has been explained. If you have any questions about this, you can come to our website at any time http://www.ycgjglcl.com consulting service
  • 上一条:压路机运行时的碾压原则
  • 下一条:如何做好摊铺机的整平工作
  • 相关产品: