The paver is one of the common construction equipment in modern pavement engineering. However, some users do not understand that their pavers always deviate during construction. Today, the rental manufacturer of Jinan paver briefly introduces the four factors that cause the paver to operate and always deviate.
Technical factors of paver operation
It is often said that if you want to do good work, you must make good use of it, but the best tool can't finish the work by itself. Just like the rider who also needs to understand and can control it well, the best paver, if the operator has no relevant experience, can't adjust all parts in place according to the needs of the site before operation, and it is difficult to avoid problems such as deviation in the actual construction.
Wiring problem of paver solenoid valve
Friends who are familiar with the paver know that the paver is very important to walk. As the paver has been used for a long time, especially for second-hand pavers, the solenoid valve wiring is easy to become loose. If there is a problem with the solenoid valve wiring on one side and it is easy to cause the working pump on the other side to be unable to supply power normally, this is easy to cause the deviation in the construction when one side is normal and the other side is not synchronized during the construction of the paver.
The traveling motor of the paver is lack of oil or has abnormal wear
The walking motor of the paver is like our feet. If the joint disease is caused by lack of oil, or the working face or end face of the walking motor is abnormally worn due to long time use, it is easy to cause abnormal power output of the problematic side due to the reduced efficiency of the motor, resulting in deviation during construction.
The construction site management is chaotic
Bad construction sites may be different. However, many pavers must have seen scientific and standardized construction operations. In reality, many pavers are hard to have such ideal construction conditions. Weather, on-site vehicles, subgrade working surface, on-site personnel and vehicle cooperation and avoidance will lead to pavers failing to move forward according to our ideal route and deviation during construction.
It is not very realistic to require that the paver hands do not deviate a little every time, but the second-hand construction machinery of Steel Jiatianxia believes that as long as we make all preparations before construction and pay more attention to the on-site command and cooperation during construction, we can greatly reduce the deviation of the paver during construction. Come to our website for more relevant content http://www.ycgjglcl.com Ask!