一、压路机型号

　　1、 Roller model

　　1、根据操作重量区分：微型（1吨以下）；小型（1-6吨）；中型（6-10吨），重型（10-14吨）；超重型（16吨以上）

　　1. According to the weight of the operation: micro (less than 1 ton); Small (1-6 tons); Medium (6-10 tons), heavy (10-14 tons); Heavy duty (over 16 tons)

　　2、按压轮区分：单钢轮、双钢轮、三光轮、轮胎

　　2. Pressing wheel differentiation: single steel wheel, double steel wheel, three wheel, tire

　　3、按压实原理分：振动压路机、静作用压路机、弗击压路机、组合压路机

　　3. According to the compaction principle, it can be divided into vibratory roller, static action roller, vibratory roller, and combination roller

　　二、型号解释

　　2、 Model Explanation

　　1、静压式压路机：各种压实作业，使被碾压层产生永久变形而密实。又分钢轮式和轮胎式两类。碾轮构造有光碾、槽碾和羊足碾等。光碾应用最普遍，主要用于路面；

　　1. Static pressure roller: Various compaction operations that cause permanent deformation and compaction of the compacted layer. It is divided into two types: steel wheel type and tire type. The roller structure includes light rollers, groove rollers, and sheep foot rollers. Smooth grinding is the most common application, mainly used for road surfaces;

　　2、震动压路机：面面层压实。采用机械或液压传动，能集中力量压实突起部分，压实平整度高，适于沥青路面压实作业。

　　2. Vibration roller: compacting the surface layer. Using mechanical or hydraulic transmission, it can concentrate strength to compact protruding parts, with high compaction smoothness, suitable for asphalt pavement compaction operations.

　　3、钢轮式压路机：其主要技术参数是机重和线压力。80年代各种钢轮式压路机机重范围约为:两轮压路机2～13吨，三轮压路机1～15吨，按需要可加压重1～3吨,三轴三轮压路机13～14吨，加压重后为18～19吨。碾轮采用充气轮胎,一般装前轮3～5个，后轮4～6个。

　　3. Steel wheel roller: Its main technical parameters are machine weight and line pressure. In the 1980s, the weight range of various steel wheeled road rollers was approximately 2-13 tons for two wheeled road rollers, 1-15 tons for three wheeled road rollers, and 1-3 tons for pressurized weight as needed. For three-axis three wheeled road rollers, the weight range was 13-14 tons, and after pressurized weight, it was 18-19 tons. The grinding wheel adopts inflatable tires, usually equipped with 3-5 front wheels and 4-6 rear wheels.

　　4、轮胎式压路机：接地压力，压力调节范围为0.11～1.05兆帕。轮胎式压路机采用液压、液力或机械传动系统，单轴或全轴驱动，宽基轮胎铰接式车架结构三点支承。压实过程有揉搓作用，使压实层颗粒不破坏而相嵌，均匀密实。机动性好，行速快（可达25公里/时）,用于道路、飞机场等工程垫层的压实。

　　4. Tire roller: Ground pressure, pressure adjustment range is 0.11-1.05 megapascals. The tire roller adopts a hydraulic, hydraulic or mechanical transmission system, single axis or full axis drive, and a wide base tire articulated frame structure with three-point support. The compaction process has a kneading effect, which ensures that the particles in the compacted layer are not damaged and are evenly compacted. Good maneuverability and fast travel speed (up to 25 kilometers per hour), used for compacting cushion layers in roads, airports, and other engineering projects.

　　5、拖式振动压路机：可以有效地压实各类土壤及岩石填方，适用于现代高速公路、机场、路堤填方、海港、堤坝、铁路、矿山等工程建设施工。

　　5. Trailing vibratory roller: can effectively compact various types of soil and rock fill, suitable for modern highway, airport, embankment fill, harbor, dam, railway, mining and other engineering construction.

　　本文由  济南压路机租赁 友情奉献.更多有关的知识请点击  http://www.ycgjglcl.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Roller Rental For more related knowledge, please click http://www.ycgjglcl.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned