In fact, water stability mixing station and most mechanical equipment, running for a long time will appear overheating phenomenon, which also makes many users worry that the emergence of this phenomenon will not cause damage to the equipment. Let's first analyze the reasons.
The heat source of ji 'nan water stability mixing station produces too much waste heat, and there are three ways to produce excess waste heat:
One is the diesel engine combustion conditions, such as improper injection pressure adjustment, valve phase imbalance, injection timing is not accurate, fuel water content is too high, diesel engine intake too much. Second, the friction heat generated by hydraulic transmission and other transmission systems increases, such as poor lubrication, so that friction increases; Third, excessive heat is converted by pressure loss. For example, the hydraulic pipeline blockage or excessive curvature will increase the pressure loss along the way, the valve group action is too frequent, and the energy loss caused by throttling and overflow is too large.
The heat dissipation capacity of the heat dissipation source is insufficient, which is manifested as poor coolant quality and decreased heat dissipation capacity. For example, the cooling water is hard water, the viscosity of hydraulic oil and oil is too large, and the cooling capacity of fans, pumps, hydraulic pumps and radiators is insufficient due to old disrepair. In addition, excessive ambient temperatures and operating errors can lead to excessive waste heat generation.
In addition, the production efficiency of Ji 'nan water steady mixing station determines the speed of the whole project progress. In order to ensure the quality and efficiency of mixing, the excavator can be used to turn over and balance the moisture of raw materials. Because the water content of black ash and white ash in water stable mixing station is determined by many uncertain factors, especially white ash, digestion quality, own quality, whether screening, etc., will affect the use efficiency of white ash. Therefore, before the use of water stability mixing station, to ensure the appropriate construction moisture content of gray, and grasp the appropriate opening time.
In order to prevent overheating and damage to equipment caused by water stability mixing station, operators need to do regular inspection work and regular maintenance work in daily life. More questions you can come to our website for consultation.