公司新闻
路面机械设备发动机及液压系统的维护要点
来源：http://www.ycgjglcl.com/ 日期：2022-06-24
发动机的维护要点
Key points of engine maintenance
在对发动机的使用过程中，由于发动机系列和型号之间存在着较大差异，因此需要在对内部运转的精度运算和配合间隙上存在很大差别。
In the process of using the engine, there are great differences between engine series and models, so there are great differences in the accuracy calculation and fit clearance of internal operation.
维护人员需要在对发动机使用前例行检查润滑油的质量，更换机油过滤器要按照既定流程进行而且要坚持选择原装产品；
The maintenance personnel shall regularly check the quality of lubricating oil before using the engine. The oil filter shall be replaced according to the established process and the original product shall be selected;
其次，需要对燃油过滤器进行更换，同时对燃油箱进行清洗使其保持清洁状态；维护人员要防止进气通道出现漏气状况一定要使用高质量的空气滤芯。此外，在更换燃油的时候切记要注意燃油标号，以免出现使用错乱的情况。
Secondly, it is necessary to replace the fuel filter and clean the fuel tank to keep it clean; Maintenance personnel must use high-quality air filter elements to prevent air leakage in the air inlet channel. In addition, when changing the fuel, remember to pay attention to the fuel label to avoid confusion.
液压系统的使用与维护
Use and maintenance of hydraulic system
因为液压系统需要使用较高质量的液压油滤芯，再加入液压油的过程中需要经过有高过滤精度的滤油机，所以不能在液压油箱中将其直接投进去。
Because the hydraulic system needs to use high-quality hydraulic oil filter element, and the process of adding hydraulic oil needs to pass through an oil filter with high filtering precision, it cannot be directly put into the hydraulic oil tank.
在实际工作中，设备的运作但原先受到污染时会受到直接影响而发生损坏。在对液压器件进行维修时，为了使其保持较高的清洁度，必须将其进行密封。
In actual work, the operation of the equipment will be directly affected and damaged when it is polluted. During the maintenance of hydraulic components, they must be sealed in order to maintain a high degree of cleanliness.
济南路面机械设备厂家认为在对液压系统进行拆卸时为了防止系统出现问题，不要随意拆卸零件而且要确保将储能器的压力完全释放出来。在对控制油路内的气体进行排除时，如果清理的不够及时，那么液压制动器内的压力就会出现磨损等状况从而导致机械出现故障。
Jinan road mechanical equipment manufacturer believes that in order to prevent problems in the hydraulic system during disassembly, do not disassemble parts at will and ensure that the pressure of the accumulator is completely released. When removing the gas in the control oil circuit, if the cleaning is not timely enough, the pressure in the hydraulic brake will be worn, resulting in mechanical failure.
以上便是问题的相关解答内容了，如果您想获取更多相关信息，就来关注我们网站http://www.ycgjglcl.com吧！
The above is the relevant answers to the questions. If you want to get more relevant information, please follow our website http://www.ycgjglcl.com Come on!
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:永诚广建公路材料（山东）有限公司 
备案号：