1．必须遵守矿山一般安全规程、厂内道路运输安全规程及道路交通法的规定。

　　1. It is necessary to comply with the general safety regulations of the mine, the safety regulations of road transportation in the factory, and the provisions of the Road Traffic Law.

　　2．启动前，必须对设备的安全防护装置进行详细检查，确认正常后，方可开动。

　　Before starting, it is necessary to conduct a detailed inspection of the safety protection devices of the equipment and confirm that they are normal before starting.

　　3．设备维修保养时，司机必须做好维检修安全确认制。设备加油时，禁止吸烟和动用明火。

　　When repairing and maintaining equipment, drivers must establish a safety confirmation system for maintenance and repair. Smoking and the use of open flames are prohibited when refueling equipment.

　　4．开动前，必须检查设备周围有无障碍物，确认无误后，方可鸣笛起步。

　　Before starting, it is necessary to check for any obstacles around the equipment and confirm that there are no errors before sounding the horn to start.

　　5．设备在行驶和作业时，车辆外各部禁止乘坐站人，禁止上下车，严禁接打手机，需接打时必须停在安全地点。

　　During the operation and driving of the equipment, passengers are prohibited from standing outside the vehicle, boarding and disembarking are prohibited, and it is strictly forbidden to make or receive phone calls. When making or receiving calls, they must be parked in a safe location.

　　6．禁止在坡道上停车，遇有故障时必须采取止轮措施，拉上制动器。

　　6. It is prohibited to park on a slope. In case of a malfunction, measures must be taken to stop the wheels and apply the brake.

　　7．工作后，必须将车辆停放在平坦场地，确认无误后方可离开。

　　After work, the vehicle must be parked on a flat surface and confirmed to be correct before leaving.

　　本文由 济南压路机租赁   友情奉献.更多有关的知识请点击  http://www.ycgjglcl.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Roller Rental For more related knowledge, please click http://www.ycgjglcl.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.